Guest user
BMW '02 Owners
Previous Next

Tuesday, 27 May 2008

4 messages

brian dolan <...> said:
Does any one know the BMW part number for an upgraded brake master
cylinder when converting 2002tii to vented e21 rotors. Rob Shisler wrote
a piece in the BMW Car Club magazine issue 57 June/July 2004 page 32/33
mentioning the master cylinder from a e28 528 model is this bulkhead
mounted?

Brian

Cheers John, I guess the e28 master cylinder applies to the american spec cars.

Top

FYI
Sent from my BlackBerry® wireless device

-----Original Message-----
From: "David Sharp" <...>

Date: Tue, 27 May 2008 14:04:36
To:<...>
Subject: From 2002 Website

Free To The First person to collect
 
Silver 2002 lux with tii running gear, HOC271N Body shot but running gear OK  all complete currently on a sorn with the DVLA
 
Location Byfleet in Surrey KT14 7LF
 
Contact Dave Sharp on 07836751488 Or 01932355894 Or email ... Disclaimer
 
 Any views or opinions expressed are those of the author and do not necessarily represent those of IDL. The contents of this email do not constitute a contract.
Folded text

 

Top

Brad,

Sounds to me , and I have experienced this very same problem, with my 2002 cabriolet manual pump, if yours is manual the rod that pushes the plate which draws the fuel from the tank on mine wore through the plate and obviously could not function any more, take the pump off and have a look at the rod and plate. Good Luck

Regards

Jeremy

PS Come back to me if you need a new pump, I might have one as a spare. 07947 595033 Good Luck 

Folded text
Top

HI, It might do, but the master cyls on LH drive cars are down on the floor. That's the problem with info that is specific to either LHD or RHD markets.
Cheers,
John



Date: Tue, 27 May 2008 11:56:17 +0000
From: ...
To: ...
Subject: Re: [bmw02] Upgrade brake master cylinder for Big Brake conversion

brian dolan <...> said:
Does any one know the BMW part number for an upgraded brake master
cylinder when converting 2002tii to vented e21 rotors. Rob Shisler wrote
a piece in the BMW Car Club magazine issue 57 June/July 2004 page 32/33
mentioning the master cylinder from a e28 528 model is this bulkhead
mounted?
Brian
Cheers John, I guess the e28 master cylinder applies to the american spec cars.


Click here SEEK New Zealand's #1 jobsite

Top